Keeping your flush tank and toilet seat working well for long periods will help you save money and keep maintenance costs low. Keeping up regular maintenance lets these bathroom parts work well while looking good for multiple years. These steps show you how to make your flush tank and toilet seat last longer.

1. Clean the inside of your tank and outer surface of your toilet seat at regular intervals to preserve both elements.
Prolonged exposure to dirt and minerals plus bacteria world damage both flush tank components and your seat simultaneously.

Flush Tank Cleaning Tips:

Clean the inside of your flush tank once every six months to stop sediment from entering the fill valve or harming the flapper. Spray a solution of white vinegar and water to remove buildup without harming any parts.
Do not add bleach since it will rust the tank parts.
Toilet Seat Cleaning Tips:

Smoothly wash the surface by applying gentle soap to the seat and using a soft fabric. Regular use of rough cleaning fluids will leave scratches on surfaces and slowly break down product material.
Regular wood or coated toilet seats need cleaners designed for their type of material.

2. Handle leaky and running toilets right away to save water and protect system parts.
A leaking flush tank both squanders water and speeds up component breakdown due to excess stress.

How to Check for Leaks:

Drip two drops of food color into your flush tank then watch for color changes after 15 to 30 minutes. When food coloring appears naturally in your toilet bowl it means you have a leak problem.
Check if the flapper or flush valve has broken parts because these parts cause most water leaks. Replace tired parts immediately.
Running toilets wear down their flush tanks by making them operate non-stop. 

3. Adjust the Water Level
Maintaining the proper water height in your flush tank stops flooding and decreases component strain especially for the overflow tube and flapper.

How to Adjust:

Examine the tank float mechanism either ball float or cup float and fine-tune it so the water level positions 1 inch below the overflow pipe.
Setting exact water volumes lets the system flush well and helps keep strain off the flush tank parts.

4. Tighten Loose Components
Loose parts inside your flush tank or toilet seat will eventually cause problems if you don't fix them.

Flush Tank Maintenance:

Regularly use a wrench to make the bolts and screws that connect the tank to bowl more secure. When fasteners are loose they can develop water leaks or fractures.
Look for signs of worn gasket and seal parts then replace them with new ones.
Toilet Seat Maintenance:

You need to tighten all screws that link the toilet seat bracket to its base for better stability. Loose seats tend to cause both seat and toilet problems through shifting and cracking hardware.

5. Use High-Quality Materials
You get longer service from your toilet parts when you pick reliable construction materials.

Flush Tank:

Replace parts that wear down fastest with solid materials such as flappers, fill valves and flush levers.
Toilet Seat:

You should pick seats manufactured from molded wood, polypropylene and thermoplastic as these materials stand up better than low-priced materials.

6. Avoid Misuse
Treat your toilet with care to prevent unnecessary damage:

Heavy loads placed on the toilet seat can quickly break the seat base.
Don't put things into the toilet that should not be flushed because these items block pipes and make the flush tank work harder than needed.

Final Thoughts
Your toilet can last longer when you maintain proper cleaning practices and make quick repairs plus properly use these components. Performing these effortless actions helps you save on replacement costs while making your toilet work better for many years.

For More:

https://www.nairaland.com/8278756/installing-toilet-hidden-cistern
https://murrayblog.tistory.com/34
https://medium.com/@simonsmiths/how-to-decorate-a-bathroom-57fc03f21a39
https://www.deviantart.com/simonsmith02/journal/DIY-Toilet-Installation-1135798009