All You Need to Know About GI Sheet Weight with it's Dimensions & Applications

GI sheet stands for Galvanized Iron sheet, a steel sheet that has been plunged in a defensive layer of zinc.

This zinc coating ensures the metal from rust and corrosion, making it a well known choice for both residential and mechanical applications.

When planning a structure, choosing the proper GI sheet weight is truly critical. It straightforwardly impacts not just the cost, but moreover the stacking, solidness, and by and large solidness of your venture.

Why GI Sheet Weight Matters

The weight of a GI sheet depends on two fundamental components:

✅ Thickness of the sheet (Gage or mm), Thicker sheets weigh more.

✅ Measure or measurements, The length and width of the sheet influence add up to weight.

For engineers and builders, this implies choosing the right thickness to handle stacking, wind weight, and other push conditions, without including pointless weight to the structure.

Thickness, Dimensions & GI Sheet Weight Explained

Here are a number of common thicknesses of GI sheets and their approximate weights per square meter (Kg/m²) to allow you a clear picture:

➥ 0.5 mm thick GI sheet: generally 4–5 kg/m²
➥ 0.7 mm thick GI sheet: generally 5.5–6.5 kg/m²
➥ 0.8 mm thick GI sheet: generally 6–7.5 kg/m²
➥ 1.0 mm thick GI sheet: generally 8–9.5 kg/m²
➥ 1.2 mm thick GI sheet: generally 9.5–11 kg/m²

This implies a 1 m × 1 m sheet of 0.5 mm thick GI will weigh approximately 4–5 kg, whereas the same measurements at 1.0 mm thick will weigh about 9–9.5 kg.

Applications Based on Thickness and Weight

✅ 0.5 mm – 0.7 mm:

Appropriate for lightweight applications, material, divider cladding, untrue ceiling, where stacking isn’t a gigantic thought.

✅ 0.8 mm – 1.0 mm:

Gives a great adjust of quality and weight. Regularly utilized in mechanical material, agrarian structures, carports, and little capacity buildings.

✅ 1.2 mm and over:

Gives heavy-duty auxiliary quality. Perfect for overwhelming mechanical buildings, manufacturing plant rooftops, and zones with overwhelming snowfall or solid wind weight.

Why Galvanized Coating Adds Durability

The zinc layer on the GI sheet avoids the base steel from reaching discuss and water specifically, which diminishes rust and erosion.

This makes GI sheets more strong, low-maintenance, and cost-effective within the long term, particularly in muggy or coastal regions where standard steel would rust rapidly.

The GI sheet weight straightforwardly depends on its thickness and measurements.

➥ More slender sheets (like 0.5 mm or 0.7 mm) weigh less and are appropriate for lightweight structures.

➥ Thicker sheets (like 1.0 mm or 1.2 mm) weigh more and are utilized where more prominent quality and steadiness are required.

Utilizing the proper thickness spares you from over-engineering and including pointless stacking to your structure, whereas making beyond any doubt your building is solid sufficient to handle all conditions.

Visit here for detail guide on GI Sheet: https://www.aesteiron.com/weight-chart-calculator/gi-sheet-weight-calculator.html